Gun cleaning solvent C4G is a non-oil based gun cleaner. It degreases metal surfaces, which require a thorough cleaning. Effectively dissolves and cleans the gun of gunpowder residue, copper and lead. Actively removes rust. It forms a dry anti-corrosion film, which serves also like a separation layer reducing abrasion and deposition of bullet and gunpowder residue in the barrel and thus makes further cleaning easier. Instructions for use: 1. Get rid of the coarse dirt in the barrel using a wire brush. If the gun is wet, wipe it with a dry cloth. 2. Shake well before use. Apply the product on the outside and inside of the barrel. (avoid contact with wooden parts of a gun). 3. Let it act for 30 to 60 seconds and then wipe with an absorbent cloth or gun cleaning mop. 4. For thorough cleaning, repeat the procedure. 5. After cleaning, treat the gun with gun oil O4G or O4G EXTRA from FOR GUN product line. On the wooden parts of a gun use revitalizing oil REWOIL from FOR GUN product line. H304 May be fatal if swallowed and enters airways. H318 Causes serious eye damage. EUH066 Repeated exposure may cause skin dryness or cracking. P102 Keep out of reach of children. P280 Wear protective gloves/protective clothing/eye protection/face protection. P301+P310+P330 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing. P337+313 If eye irritation persists get medical advice/attention. P501 Dispose of contents/container to in accordance with local/ regional/ national/ international regulation. Contains: aliphatic hydrocarbons> 30%, anionic surfactants less than 5%.